Ballistol Non Abrasive Suppressor Cleaner BALLISTOLSUPCLN 16.9oz

The suppressor cleaner dissolves and neutralizes combustion residues. Suppressor are particularly difficult to clean if they can not be dismantled. Although carbon suppressors with narrow sections on fins and small holes improve the performance of the suppressors, the suppressor cleaning is much more difficult . With the Ballistol suppressor cleaner, the residues in the dirty suppressor can be easily cleaned out. Suitable also for use in a sonic cleaner.

APPLICATION:

Close suppressor on one side with rubber corks and fill completely. Leave the cleaner in the suppressor for at least 2 hours. All combustion residues will be dissolved automatically. In the case of suppressors with particularly high firing loads, heat the cleaner to approx. 40 °C and extend the exposure time to at least 4 hours. Then remove the cleaner. To dissolve remaining dirt, fill half of the damper with clear water. Close the second opening and shake vigorously. If necessary, repeat this rinsing process until the water no longer contains soot particles. If the suppressor cannot be closed (due to its design), it can be completely immersed in the cleaner. Also suitable for dismountable silencers. Insert dirty parts and clean with a brush and water after the reaction time.